Deenbandhu Chhotu Ram University of Science & Technology Admission 2012

Advertisements

 

Deenbandhu Chhotu Ram University Admission

Deenbandhu Chhotu Ram University of Science and Technology Murthal
(A state university estd under Haryana legislature act 29 of 2006 and recognized under 12b of the UGC act 1956), Murthal, Sonepat-131039, Haryana, Website www.dcrustm.org

Admission notice-2011

Admission in B.Tech/M.Tech/Master’s weekend programmes

The university invites applications for admission in following weekend (Saturday-Sunday) programmes

M.Tech: Computer Science and Engineering (30 seats), Electronics and Communication Engineering (30 seats), Highway Safety and Engineering (30 seats)

B.Tech: Civil Engineering (60 seats), Computer Science and Engineering (60 seats), Electronics and Communication Engineering (60 seats), Electrical Engineering (60 seats), Mechanical Engineering (60 seats)

Master of Urban and Rural Planning (30 seats)

Master in Hospital Administration (20 seats)

Eligibility and admission criteria

PG Programme: The programme is open to candidates holding degree with minimum 55% (50% for SC/ST) marks in aggregate or equivalent CGPA in appropriate field approved by any Indian University included in the approved list of Association of Indian Universities (AIU) or equivalent. The details of the course offered, eligible qualifying degree and branches, admission criteria are as under

M.Tech (Computer Science and Engineering): B.E./B.Tech in Computer Science and Engineering/information Technology/Electronics Engineering/Electronics and Communication Engineering/Electronics and Telecommunication Engineering/ Electronics and Instrumentation Control, Instrumentation and Control, Electrical and Electronics Engineering/Electrical Engineering/Instrumentation Engineering, MCA/M.Sc (Computer, IT, Electronics, Maths, Physics)

M.Tech (Electronics and Communication Engineering): B.E./B.Tech in Electronics Engineering/Electronics Instrumentation and Control/ Instrumentation and Control/Electronics and Communication Engineering/Electronics and Telecommunication Engineering/Electrical and Electronics Engineering/Electrical Engineering/Instrumentation Engineering/Computer Science and Engineering

M.Tech (Highway Safety and Engineering): B.E./B.Tech in Civil Engineering/Traffic Engineering/Transportation Engineering

Master of Urban and Rural Planning: Bachelor’s degree in Architecture/ Planning/Civil Engineering/Masters degree in Geography/Sociology/Economics

Master in Hospital Administration: DM/MCh/MD/MS/MDS/MBBS/BDS/BAMS/ B.V.Sc/BHMS

For UG Programme: The programme is open to candidates holding 3 years or more diploma in the appropriate fields approved by the directorate of technical education (Haryana) or equivalent with 50% marks in aggregate of all semesters in diploma (45% for SC of Haryana)
The details of the course offered, eligible qualifying diploma and branches, admission criteria are as under

B.Tech Civil Engineering: Civil Engineering, Civil Engineering and Architecture Engineering, Architecture Engineering, Public Health and Environmental Engineering, Construction Engineering

B.Tech Computer Science and Engineering: Computer Engineering/Computer Applications, Computer Science Engineering, Computer Servicing and Maintenance, Computer Technology, Information Systems and Management, Information Technology

B.Tech Electrical Engineering: Electrical Engineering, Instrumentation and Process Control, Instrumentation and Control Engineering, Instrumentation Engineering/ Technology, Control Engineering, Control Engineering and Instrumentation, Electrical and Electronics Engineering, Power Engineering

B.Tech Electronics and Communication Engineering: Electronics and Communication Engineering, Electronics and Electrical Communication, Electronics and Television Engineering, Electronics (Microprocessor), Electronics Engineering, Electronics (Video Engineering), Industrial Electronics, Medical Electronics

B.Tech Mechanical Engineering: Mechanical Engineering, Mechanical Engineering with specialization in Tool and Die Engineering/ Metallurgy/ Production Engineering/ Plant Maintenance, Foundry Technology, Automobile Engineering, Production Engineering, Production Engineering and Industrial Management, Tool and Die Making, Plastic Engineering/Tech

Entrance test: Candidates who consider themselves eligible can apply and appear in the entrance test (as applicable). Mere applying and qualifying entrance test shall not entitle a candidate for admission. Eligibility of candidates shall be verified at the time of admission. Entrance test will be of 2 hrs duration with 100 questions of multiple choices with one correct answer without negative marking

Reservation: Reservation of candidates shall be followed according to Haryana state govt guidelines. However, in case the candidates of reserved category are not available, the seats shall be filled up by the candidates of general category

Counseling/admission: Counseling/admission shall be held on the scheduled date and time. Any change in the schedule shall be notified on the university website

Admissions shall be on the merit of the qualifying degree/diploma or entrance test as the case may be. Preference in admission shall be given to those who have already completed their degree and are in job in any organization or self employed on the day of counseling

Unfilled reserved seats if any (after inter conversion among sub categories) shall be filled by HOGC candidates on the spot

In case, the seats remain vacant, these shall be filled by the candidates who have appeared/appearing in final year examination

After exhausting the list of entrance examination, if the seats remain vacant, these shall be filled on the basis of merit of qualifying degree/ diploma examination first from HOGC and then from AIC by inviting fresh applications

If the seats still remain vacant, these shall be filled by candidates who have appeared/appearing in qualifying degree/diploma examination based on the aggregate merit up to pre final semester on AIC basis. Remaining seats if any shall be filled on first come first served basis through notice of vacant seats on website

Final year appearing candidates have to submit their pass result of qualifying degree/diploma up to 31st October, 2011 failing which their admission shall be deemed cancelled

For admission in MHA, the preference shall be given in order of (i) DM/MCh (ii) MD/MS/MDS (iii) MBBS/BDS (iv) BVSc/BAMS/BHMS

Admission notice: University invites applications for admissions in following weekend (Saturday-Sunday) programmes

For details, candidates may refer the admission notice/prospectus placed on the university website www.dcrustm.org

Prospectus-cum-application forms can be obtained from the reception counter/ office of weekend programme (administrative block) on all days (Monday to Sunday) from 21st February, 2011 (9.00 a.m. to 5.00 p.m.) up to 10th April, 2011 on payment of Rs 1000/- in cash or through demand draft or can be downloaded from the University website which should be accompanied by demand draft of the same amount or can be obtained through post by sending a demand draft of Rs 1050/- up to 30th March, 2011 from the office of programme director, weekend programme

Demand draft should be in favour of Registrar, DCRUST, Murthal (SFS A/c-31133787915), payable at Sonepat/Delhi

In case the candidates are found ineligible or applications are received late, application fee will not be refunded. No enclosure is required with the application except demand draft (in case of downloaded form) for those who appear in the entrance test. However, for admission on the basis of qualifying degree basis in PG programme, all relevant documents are to be attached with the application. In case of eligibility in more than one course, separate application form is to be submitted for each course in which the candidate is interested for admission

Admit cards for entrance test shall be collected in person from venue of examination one hour before the start of the test

The last date for receiving filled in application form in the office of programme director, weekend programme is 10th April, 2011 by 5.30 p.m.

Key dates

Availability of application forms: 21st February, 2011 to 10th April, 2011

Last date of submission of application forms: 10th April, 2011

Date and time of entrance test (entrance test/DCRUST, Murthal)

M.Tech Computer Science and Engineering: 17th April, 2011 at 10.00 a.m.

M.Tech Electronics and Communication Engineering: 17th April, 2011, 2.00 p.m.

B.Tech Civil Engineering: 17th April, 2011, 10.00 a.m.

B.Tech Computer Science and Engineering: 17th April, 2011, 2.00 p.m.

B.Tech Computer Science and Engineering, Electronics and Communication Engineering, Electrical Engineering: 17th April, 2011, 2.00 p.m.

B.Tech Mechanical Engineering: 17th April, 2011, 10.00 a.m.

M.Tech Highway Safety and Engineering, Master of Urban and Rural Planning, Master in Hospital Administration: Criteria for admission shall be academic merit of qualifying examination

Declaration of result: 19th April, 2011

For further information regarding Deenbandhu Chhotu Ram University of Science & Technology Admission, connect with us on facebook, google+ and twitter.


Tags: ADDMISION OF BDS chhotu ram university murthal, b tech vacant seat admission notice 2013, director of dcrust, Fees of DCRUST OE B TECH, m tech fees in deenbandhu chhotu ram university of science and technology Murthal haryana, vacant seat b tech admission notice 2013, venue of test net 2014 dcrust, www chhoturamuniversitymurthal com


Ask a Question: